Van Walt CT12 Operating Instructions Manual page 5

VAN WALT
Monitoring your needs
Operator ID
Optionally set the user name using alphanumeric characters.
Press 'OK' and press 'New' to create the ID.
Use the Up/Down buttons to show/change characters.
When the correct character is shown, press and hold the [+] key for 1 second to
move to the next character.
Correct mistakes by holding the [Del] key for 1 second.
Complete the process by pressing 'Done' briefly.
Select 'OK' to accept or 'Edit' to change the entry.
Multiple Operator IDs can be stored and recalled from memory as required.
Sample ID
Optionally set the Sample ID using the same method as Operator ID.
Multiple Sample IDs can be stored and recalled as required.
Both Operator ID and Sample ID are stored in the log with result and calibration
data.
Units
Results can be displayed in NTU, FTU and FNU.
Language
Select English, French, German, Spanish or Italian and press 'OK'.
This selection is not possible on all models.
Set Time
Increase/decrease the time by using the Up/Down buttons.
When the correct time is shown select 'OK'.
Set Date
Increase/decrease the date by using the Up/Down buttons.
When correct select 'OK'.
Van Walt Ltd | Prestwick Lane | Grayswood | Haslemere | Surrey | GU27 2DU | Tel. 01428 661 660 | Fax. 01428 656 808 | www.vanwalt.com
Compact Turbimeter
Operating Instructions
4