Mount The Router - Cisco 1000 ISR Series Installation And Connection

Mount the Router

Figure 2: Bracket Installation for C1121-4Px, C1126-8PLTEP and C1128-8PLTEP
Mount the Router
Before mounting the router on to the rack, refer to the following safety warning statements:
Warning
To prevent airflow restriction, allow clearance around the ventilation openings to be at least: 1.75 in. (4.4
cm). Statement 1076.
Warning • To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the
Install and Connect the Router
4
to ensure that the system remains stable. The following guidelines are provided to ensure your safety:
heaviest component at the bottom of the rack.
unit in the rack. Statement 1006.
Install and Connect the Router