Advertisement
SAFETY WARNINGS AND PRECAUTIONS
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of
personal injury and damage to equipment. Read all instructions before using the tool.
Work area conditions. Cluttered areas invite injuries
Additional work area conditions. Do not use machines or power tools in damp or wet locations.
Do not expose to rain. Keep work area well lighted.
Keep children away. Children must never be allowed in the work area. Do not let them handle
machines, tools or extension cords.
Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Al -
ways lock up tools and keep out of reach of children.
Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of
a larger industrial tool. There are certain applications for which this tool was designed. It will do the
job better and more safely at the rate for which it was intended.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Pro-
tective, electrically non-conductive clothes and non-skid footwear are recommended when work-
ing. Wear restrictive hair covering to contain long hair.
Use eye protection. Always wear approved impact safety glasses underneath a full face shield
during use. Also wear heavy duty work gloves.
Do not overreach. Keep proper footing and balance at all times. Do not reach over or across run-
ning machines.
Maintain tools with care. Keep tools sharp and clean for better and safer performance. Follow in-
structions for lubrication and changing accessories. The handles must be kept clean, dry and free
from oil and grease at all times.
Remove Adjusting keys and wrenches. Check that keys and adjusting wrenches are removed
from the tool or machine work surface before starting work.
Stay alert. Watch what you are doing, stay aware. Do not operate any tool when you are tired.
Check for damaged parts. Before using any tool, any part that appears damaged should be
carefully checked to determine that it will operate properly and perform its intended function. Any
part that is damaged should be replaced.
Replacement parts and accessories. When servicing, use only original replacement parts. Use
of any other parts will void the warranty. Only use accessories intended for use with this tool.
Do not operate tools if under the influence of alcohol or drugs. Read warning labels on pre-
scriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any
doubt, do not operate the tool.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Seite 10
Advertisement
