Table of Contents
Advertisement
The display resolution and pixel rate will change when the mode changes. In this module, the Altera
IP "PLL Reconfig" is used to set various pixel rates to the Altera IP "PLL". The RECONFIG data
for various clocks are from "PLL Controller". The module source code is located in the
"vpg_source" sub-folder. For more information about Altera's re-configuration PLL IP, please
refer to
http://www.altera.com/literature/lit-an.jsp
The "Video Source Selector" module corresponds to the selected desired video source for final
video display.
0
640x480@60P
1
720x480@60P
2
1024x768@60P
3 1280x1024@60P
4 1920x1080@60P
5 1600x1200@60P
25
27
65
108
148.5
162
Advertisement
Table of Contents
