Chapter 3 Basics; Introduction; Switching On/ Rebooting/ Switching Off The Cl-M10 - Newland CL-M10 User Manual

Introduction

This chapter provides the basics of setting and using the CL-M10

Switching On/ Rebooting/ Switching Off the CL-M10

After installed with the SIM card and fully charged, you can start to use the CL-M10.
Switch the CL-M10 on: Hold down the Power key on the right side of the terminal until the Android logo is displayed. Note
that the initialization is going to take some time before the CL-M10 displays the Home screen.
Reboot the CL-M10: Hold down the Power key on the right side of the terminal until the window below pops up, then tap
"Restart.
Switch the CL-M10 off: Hold down the Power key on the right side of the terminal until the window below pops up, then
tap "Power off".
9

Chapter 3 Basics