Charging the Battery
Connect the CL-M10 to a power outlet using the included AC adapter or USB cable. When the terminal's battery is less
than 5%, it takes about 3 hours to fully charge it (The terminal is shut down or in sleep mode).
When charging the CL-M10 with AC adapter or USB cable, the user is notified the charging statuses by the LEDs on the
terminal.
Note: If CL-M10 battery is completely drained, please press the power key to turn on after 15 minutes of being charged.
5
LEDs on the CL-M10
Green LED on
Red LED on
Red LED flashes constantly
Fully charged
Charging in progress
Low-battery alert