Operation - Havso Charlie 3.0 User Manual

Care and cleaning
Warning: To avoid electric shock always unplug you Party Cooler before cleaning
and moving. Ignoring this warning may result in injury.
General: Do not use harsh chemicals, abrasives, ammonia, chlorine bleach,
concentrated detergents, solvents or metal scouring pads. Some of these
chemicals may dissolve, damage and/or discolor your Party Cooler.
1. Disconnect the power plug from the wall outlet.
2. Remove the side tables and side baskets.
3. Remove the lid.
4. Remove the contents from the appliance.
5. Remove the detachable bottom.
6. Wipe the inside and outside with a damp cloth. By adding a small amount of
vinegar to the water you prevent mold and fungus.
7. Clean the detachable bottom and the lid parts with lukewarm
water and mild detergent.
8. Wipe all parts thoroughly after the cleaning.
9. Turn the slits in the sealing ring and in the hinge rubber strip downward when
you assemble the lid.
Important: When the Party Cooler is not in use it must be completely dry and
clean inside to avoid mold growth. Leave the lid open during storage and store the
appliance in a ventilated area standing upright.

OPERATION

17