Operation - Havso Charlie 3.0 User Manual

OPERATION

Before use
Clean the inside of the Party Cooler with lukewarm water using a mild
detergent, and then wipe dry it thoroughly before use.
The temperature in the fridge will depend on the temperature in the
surrounding area, the frequency and duration when the lid is open, and the amount
of objects inside the cooler. Therefore length of time may vary for the unit to reach the
desired temperature.
The Party Cooler is designed to be operated on a flat surface. Avoid using
it in other positions. If the appliance must be tilted for handling or moving
purposes, allow it to stand in upright position for 20 to 30 minutes before you plug it in
and turn it on. If the appliance has been lying down it must stand upright for 24 hours
before operation, or else it will be damaged.
How to Operate the Party Cooler
1. Insert the power plug into a grounded wall outlet.
2. Press the power button on front of the appliance (right side of the digital display) to
turn on the party cooler.
3. Press the thermostat button on front of the appliance (left side of the digital display)
to adjust the desired temperature. The display will flash during the adjustment. The
temperature range is 0 - 16 °C. When you use the appliance the display will show
the average temperature inside the Party Cooler.
Measures that can Improve the Cooling Function
1. 1. When you use the unit for the first time, allow the unit to operate continuously for
12-18 hours.
2. Move the content frequently so the temperature will be distributed in a more even
way. Note that the temperature is colder at the bottom.
3. Increase the amount of space between the items placed in the cooler in order for the
items to properly cool. Do not overload the Party Cooler.
16