ITEAD Iteaduino Plus Manual page 15

15
Tech Support: support@iteadstudio.com
Finally, measure voltage value at pin 48 with a multimeter or oscilloscope, you will find the voltage
changes between 0 and 3.3V periodically.
Although the script is relatively simple now, we will follow this idea to update the upgrades all along
and our ultimate idea is to make an IDE similar to Arduino and to let the program compile and run
directly after writing it in the IDE.
st
Iteaduino PLUS with A10 Core Manual iteadstudio.com 21 August, 2013