Monitoring The Recording - Sony 4-113-168-11(2) Operating Instructions Manual

Monitoring the recording

Connect commercially available
headphones to the
jack and monitor the recording. You
can adjust the monitoring volume by
pressing VOL + or –, but the recording
level is fixed.
Remaining memory indication
During recording, the remaining memory
indicator decreases one by one.
The memory is
nearly full.
When the remaining time of recording
reaches 10 minutes, the last one of the
indication flashes.
If the remaining recording time display
mode is selected, the remaining
recording time display will also flash
when the remaining time reaches 1
minute. The display will be changed
automatically to the remaining time
display.
0
GB
 (headphone)
Flashing
When the memory is full, recording
automatically stops and "
will flash in the display window three
times. To continue recording, first erase
some of the messages.
" and "FULL"