Table of Contents
Advertisement
3.1 Terminals
Wilson Benesch recommends the use of 8mm ring or spade connector cable terminations. A spanner is provided to tighten up the rhodium
plated nuts. A light pinch of the end of the supplied spanner is more than sufficient to tighten the nuts. Please be careful to not over
tighten the terminals as this could result in damage to the terminal plate or snapping of the terminal. The terminals will also accept 4mm
banana plugs.
10
Precision Series User Manual
Rev 1.0
Precision-Series-Manual-1.0.indd 10
21/03/2019 14:37
Advertisement
Table of Contents
