Nera Evolution Series Technical Description page 3

The information in this documentation is subject to change without notice and describes only the product defined in
the introduction of this documentation. This documentation is intended for the use of Nera's customers only for the
purposes of the agreement under which the documentation is submitted, and no part of it may be reproduced or
transmitted in any form or means without the prior written permission of Nera.
The information or statements given in this documentation concerning the suitability, capacity, or performance of the
mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made
between Nera and the customer. However, Nera has made all reasonable efforts to ensure that the instructions
contained in the documentation are adequate and free of material errors and omissions. Nera will, if necessary,
explain issues that may not be covered by the documentation. Nera's liability for any errors in the documentation is
limited to the documentary correction of errors.
NERA WILL NOT BE RESPONSIBLE IN ANY EVENT FOR ERRORS IN THIS DOCUMENTATION OR FOR ANY
DAMAGES, INCIDENTAL OR CONSEQUENTIAL (INCLUDING MONETARY LOSSES), that might arise from the
use of this documentation or the information in it. This documentation and the product it describes are considered
protected by copyright according to the applicable laws.
NERA logo is a registered trademark of Nera ASA. Other product names mentioned in this documentation may be
trademarks of their respective companies, and they are mentioned for identification purposes only.
Copyright Nera 2006. All rights reserved.
NGP\00329 Rev. C 23-06-2006 Evolution Series - XPAND 1