Troubleshooting; Lubrication; Removing The Blade; Remounting The Blade - Panasonic ER-GB42 Operating Instructions Manual

(household) rechargeable beard/hair trimmer
Hide thumbs Also See for ER-GB42:
Table of Contents

Advertisement

Available languages

Available languages

Lubrication

Apply the oil to the trimmer before
and after each use.
Apply a drop of oil to each point
indicated by the arrows.

Removing the blade

Hold the main body, place your
thumb against the blades, and then
push them away from the main
body.

Remounting the blade

Fit the mounting hook into the blade mounting on the trimmer,
and then push in until you hear a click.
中东亚洲.indb 13

Troubleshooting

Problem
Until problems are solved, please
follow each procedure as follows:
1. Charge the trimmer.
(See page 8.)
2. Clean the blade and apply oil.
(See page 12 and this page.)
3. Replace the blade.
The trimmer has
(See this page.)
become blunt.
4. Have the battery replaced by an
authorized service centre.
The operating time is
short.
Charge the battery for
approximately 18 hours
The trimmer stopped
continuously to rejuvenate it.
working.
If few uses remain even after
charging, the battery has reached
the end of its life. (Fluid may be
leaking due to degradation at the
end of battery life.)
Contact an authorized service
center for repair.
Push the main body into the
charge plug all the way and make
sure the charge indicator lamp
glows.
The trimmer cannot be
charged.
Charge within the recommended
charging temperature of 0 °C to
35 °C.
Action
13
17/4/6 下午5:52

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents