Page 1
Dörr DmF-480 mobile stuDio Flash with battery www.doerrfoto.de...
Page 2
Vertrauen, das sie unserem hause durch den erwerb des akku studioblitz‘ DmF-480 entgegengebracht haben. um alle Funktionen ihres neuen blitzgeräts nutzen zu können, empfehlen wir ihnen, vor der ersten inbetriebnahme des akku studioblitz‘ DmF-480 die bedienungsanleitung genau zu lesen.
Page 3
20% Restladung im Akku. Er sollte spätestens dann geladen werden. ersatzaKKu Damit Ihrem DÖRR Akkublitz DMF-480 „On Location“ nicht die Energie ausgeht empfehlen wir Ihnen die Anschaff ung eines Zweitakkus (optional, DÖRR Lithium-Ion Akku für DMF-480 Art.Nr. 371321).
Page 4
Nach einem Blitz kann es bis zu ca. 2,5 Sekunden dauern bis er für den nächsten Blitz bereit ist. Der DÖRR Akku Studioblitz DMF-480 besitzt im LC Display eine Blitz- bereitschaftsanzeige. Der Ladevorgang wird dort symbolisch angezeigt und sobald der Blitz wieder bereit ist erscheint ein Blitzsymbol und „ON“.
Page 5
Die Abbrenndauer des Blitzgeräts ist dafür zu lang. Es entsteht Bewegungsunschärfe mit „Wischeffekt“. Der DÖRR Akku Studio- blitz DMF-480 besitzt für solche Motive 5 Einstellmöglichkeiten mit verkürzter Abbrenndauer. Damit können Sie – unabhängig von der eingestellten Belichtungszeit - auch schnelle Bewegungen im Bild „einfrieren“, also scharf abbilden. Die Tabelle zeigt Ihnen die möglichen Einstellungen:...
Funksender sobald der Testknopf am Blitz gedrückt wird. • Sensor (Photozelle/Slave) Sie können den DÖRR Akku Studioblitz DMF-480 auch durch einen Quellblitz (z. B. ein anderes Blitzgerät) kabellos fernauslösen. Drücken Sie dazu die Sensor-Taste. Nun ist die Photozelle aktiviert. Platzieren Sie den Blitz an der gewünschten Position.
wichtige hinweise • Der Blitz besitzt einen Überhitzungsschutz. Wenn oft hintereinander geblitzt wurde schaltet sich die Kühlung ein um das Gerät vor Überhitzung zu schützen. Während der Überhitzungsschutz aktiv ist kann ca. 30 Minuten nicht mit dem Blitz gearbeitet werden. •...
Page 8
Preamble congratulations for the purchase of your new DmF-480 studio fl ash! in order take full advantage of all features of your new fl ash, we recommend to read the instructions of the DmF-480 mobile studio Flash carefully before starting operation.
We recommend purchasing a replacement Li-Ion battery, item no. 371321 for your mobile studio fl ash DMF-480. So you will not run out of energy “on location”. Working with the DMF-480 Mobile Studio Flash with Battery mounting the Flash unit The integrated handle is comfortable to hold and allows an assistant to align the fl ash.
This corresponds to two aperture steps. leD moDelling light The DMF-480 flash boasts of a LED modelling light, which helps to judge shadows and reflections before taking the picture. Press the MODEL button to switch the light on. Pressing the button again, the modelling light will be switched off again.
Page 11
It can be difficult to get sharp images of fast movements e.g. of snow boarders or downhill bikers. The regular flashing time of the flash unit will be too long and will create in-motion unsharpness with a wiping effect. The DMF-480 studio flash offers five settings for reduced flashing times in order to master such kind of objects.
Formers The DMF-480 studio flash is fitted with a Bowens bayonet. It is therefore possible to connect a variety of light formers out of the DÖRR studio accessory line – an optional adapter ring will be required. Light formers are essential for attractive portrait shoo- ting and for a creative light composition.
imPortant notes • The flash boasts of an overheat control. After frequent use, the cooling is activated to prevent overheating. While the overheat control is active, you cannot work with the flash for around 30 min. • When the battery has been recharged, it will require approx. 30 min to cool down. So protection against damage by overheating is given.
Need help?
Do you have a question about the DMF-480 and is the answer not in the manual?
Questions and answers