Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Dorr DAF-320
Summary of Contents for Dorr DAF-320
- Page 1 DAF-320 TTL FLASH CANON www.doerrfoto.de...
- Page 2 INTRODUCTION The DÖRR DAF-320 is a system flash, which harmonizes with the functions of your Canon DSLR or system camera. Our intension is that by using the DAF- 320 you will achieve much better image results than with the use of the built-in camera flash or without flash. For an optimum use of the functions of your new flash unit, please read these instructions before starting to work with the flash.
- Page 3 SLEEP MODE In order to save the battery power, the DAF-320 flash is fitted with a power saving function. It becomes active 60s after last use of the camera, or when you switch the camera off. The flash goes to standby mode and the display shows Sleep.
- Page 4 INDIRECT FLASH The DAF-320 boasts of a bounce and tilt flash head. So the flash direction can changed horizontally by 150° (60° to the left, 90° to the right) and from -7° to 90° vertically. You can avoid the direct flash onto your object, by directing the flash to a reflecting surface (incident angle = angle of reflection). The surface should be neutrally white (white wall or ceiling).
- Page 5 For most objects, it is of great advantage to use the flash laterally. Illumination will be more pleasant and more balanced than with a frontal flash. For this purpose, the DAF-320 can be used in wireless TTL flash mode. The wireless TTL flash mode allows you creative illumination of your object with one or more flash units from various directions.
- Page 6 5. Place the DAF-320 flash in the desired position and make sure that there is no obstacle between the master and remote flash. The sensor of the remote flash must point towards the master flash. We recommend positioning the remote flash in a way that the sensor is in optimum position. Then turn the flash head into the desired flash direction.
-
Page 7: Specifications
LED ASSIST LIGHT FOR AUTOFOCUS The DAF-320 flash is fitted with an autofocus assist LED light. In case of very low light, the contrasts of your object may be insufficient for proper auto- focus. In this case, the autofocus assist LED will go on, when the camera shutter is pressed halfway down. So the object will be illuminated and even in the darkest rooms, the autofocus will be able to work fast and precisely.
Need help?
Do you have a question about the DAF-320 and is the answer not in the manual?
Questions and answers