Hoffmann
H 36 DIMONA
9.
After both wings have been mounted remove the mounting lever and install the safety clip in the
main mounting bolts.
- HORIZONTAL FIN & ELEVATOR-
1.
Position Fin above Vertical Fin
2.
Raise Elevator slightly and firmly, push fin aft against the stop
3.
As you push the fin aft guide the elevator drive fork into the elevator lug
4.
Lock safety pin
1.
Plug in compensation nozzle - if desired
2.
Apply tape, if desired to gap between wing and fuselage
Check elevator control for proper connection and inspect elevator actuator inserted in driving fork
- FINAL ASSEMBLY -
CAUTION
49
8
Aircraft Handling
and Servicing
8—3
2—1 0