Remote Ecu Management (Ema) - APsystems ECU-3 Installation And User Manual

Remote ECU Management (EMA)

The ECU has been design with remote connect functionality.
You can access this remote functionality through the APsystems
Energy Monitoring & Analysis (EMA) website, using your
installer login credentials. Changes made remotely through
the EMA do not take affect until the ECU's next reporting
cycle.
The ECU must first be installed with verified Power Line
Communication (PLC) and Internet connectivity.
The ECU remote functionality allows you to do the following:

Set Time Zones
 Manage Inverter IDs
There are additional ECU functions available but the instructions
are not outlined in this document. If you need to access one of the
following features, please contact APsystems Technical Support.
 Change system parameters
 Turn the inverters ON and OFF
 Reset GFDI

Reset Power Settings
NOTE: This section of the documentation assumes you
have a working knowledge of the APsystems EMA.
1) Log onto your APsystems EMA account.
Your Customer List within the Installer Portal is displayed.
2) Select the customer's ECU you want to
manage and click on the pencil icon in the
"Change ECU Status column".
APsystems ECU-3 V4 Installation/User Manual
Figure 45
30