Sony VGN S400 Series User Manual page 78

VGN-T300 Series models
1 Disconnect all peripherals from the computer.
2 Plug the power cord (1) into the AC adapter and an AC outlet.
3 Plug the cable attached to the AC adapter (2) into the DC In port (3) on the port replicator (4).
4 Remove the port replicator connector cover.
!
Your computer comes with the cover attached to the port replicator connector. When you remove the port replicator connector cover, make sure to keep the
cover at hand.
n N
78
Using Peripheral Devices