Table of Contents
Advertisement
What should I do if a BIOS error appears when my computer starts?
If the message "Press <F1> to resume, <F2> to setup" appears at the bottom of the screen
1
Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears.
2
Set the date (month/day/year). Press Enter.
m
3
Press the
key to select System Time, and then set the time (hour: minute: second). Press the Enter key.
,
4
Press the
key to select the Exit tab, and then press the
default values appears.
5
Press the Enter key.
The Load Optimal Defaults window appears.
6
Select OK, and press the Enter key.
7
Select Exit (Save Changes), and press the Enter key.
The Save configuration changes and exit setup window appears.
8
Select OK, and press the Enter key. The computer restarts.
If this occurs on a regular basis, contact an authorized Sony Service Center. To find the nearest center or agent, visit the Sony
online support Web site.
m
key to select Get Default Values. The message Load factory
n N
149
Troubleshooting
Hide quick links:
Advertisement
Table of Contents
