Adjusting The Rear Suspension - Honda CB300R 2019 Manual

Other Adjustments

Adjusting the Rear Suspension

Adjusting the suspension requires a pin
spanner. We recommend that you have your
motorcycle serviced by your dealer.
# Spring Preload
You can adjust the spring preload by the
adjuster to suit the load or the road surface.
Use the pin spanner to turn the adjuster.
Position 1 is for a decrease spring preload
(soft), or turn the position 3 to 7 increase
spring preload (hard). The standard position
is 2.
92
Adjusting the Rear Suspension
u
Pin spanner
NOTICE
Attempting to adjust directly from 1 to 7 or 7 to 1
may damage the shock absorber.
NOTICE
Do not turn the adjuster beyond its limits.
NOTICE
The rear shock absorber damper unit contains
high pressure nitrogen gas. Do not attempt to
disassemble, service, or improperly dispose of
the damper. See your dealer.
Adjuster
2
1 3 4 5 6 7