Terminals; Power Supply - Qel QIRF Installation, Operation And Maintenance Manual

2.4.1 Terminals

2.4.2 Power Supply

NOTICE: Installing or using this equipment in a manner not specified by the
manufacturer could cause electric shock, bodily injury, or risk of fire.
Power Supply:
Voltage:
Note: No external over-current protection is required. Over-current protection is
provided by means of fuses F1.
Fuse F1:
QIRF Operation Manual
85050-301-000 Rev C
QIRF Operation And Maintenance Manual
Display Board Terminals
15-24VAC
18-30VDC
Note: AC Power Supply must be non-grounded (floating).
PolySwitch 1.6A
50/60Hz 1.0A AC Total max.
1.0A DC Total max.
9
May. 01, 2012