Install The Agilent Io Libraries Suite Version 14.2 Or Higher - Agilent Technologies U2121A Quick Start Manual

C. Install the Agilent IO Libraries Suite Version 14.2 or Higher
N O T E
N O T E
14
The Agilent IO Libraries Suite 14.2 is available in the Agilent
Automation- Ready CD that comes with the standard purchase of
U2100A Series DAQ devices.
• If you do not have the Agilent Automation-Ready CD, obtain the Agilent IO Libraries Suite
14.2 or higher at http://www.agilent.com/find/iolib.
• Ensure that you do not have any USB DAQ device connected to your PC during installation of
the Agilent IO Libraries Suite.
1 Disconnect any USB DAQ device that is connected to your PC and
close all other applications on your PC.
2 Insert the Agilent Automation- Ready CD into your CD- ROM drive,
and follow the instructions on your screen.
3 If the installation does not start automatically, go to Start > Run (on
the Windows start menu) and type <drive>:\autorun\
auto.exe where drive is your CD- ROM drive.
4 If you obtain the Agilent IO Libraries Suite from the web, save the
self- extracting zip file (*.exe) to any location on your hard disk.
5 Double- click the installation file to launch the installation.
6 Follow the instructions on your screen to proceed with the
installation.
7 After the installation is completed, you will see the IO Control icon
on the Windows taskbar notification area as shown below.
For detailed installation instructions, refer to the Agilent IO Libraries Suite Getting Started
Guide at http://www.agilent.com/find/iolib.
Agilent U2100A Series Digital IO, 32-Terminal Quick Start Guide