Sony VAIO VGN-AW100 Series User Manual page 57

To connect in STB mode
1 Connect one end of a TV coaxial cable (1) (not supplied) to your cable service access (wall outlet) (2). Connect the other
end to the VHF/UHF input port on the back panel of your set-top box (STB) (3).
2 Connect a second TV coaxial cable (4) (not supplied) to the VHF/UHF output port on the set-top box (STB) (3). Connect
the other end to the single-connection end of a splitter device (5) (not supplied).
3 Connect a third TV coaxial cable (6) (not supplied) to the double-connection end of the splitter device (5).
4 Connect the other end to the MMCX antenna converter cable (7) (supplied).
5 Connect the MMCX antenna converter cable (7) to the VHF/UHF input port (8) on the computer.
6 Connect a fourth TV coaxial cable (9) (not supplied) to the double-connection end of the splitter device (5). Connect the
other end to the VHF/UHF input port (10) on your TV monitor or display.
n 57 N
Using Your VAIO Computer