Table of Contents
Advertisement
The symbol opposite, depicting a wheelie bin with a bar across it, indicates separate
collection of the machine's electrical and electronic equipment. The user of this machi-
ne may contact collection centres (local CRM) set up by their local Council or BATTI-
STOTTI MACCHINE AGRICOLE S.r.l. directly.
7 TROUBLESHOOTING
7.1 PROBLEMS, CAUSES AND REMEDIES
PROBLEM
Following the
installation and
connection phases,
the machine won't
start up
The pneumatic
adjustment of the
machine doesn't
work
The inter-row weeder
does not perform
mechanical weeding
properly
Oil temperature too
high
34
CAUSE
MEASURE TO BE TAKEN
Make sure the hydraulic couplings are
correctly inserted.
Incorrect
hydraulic/
electrical
Check the electrical connection of the
connection
control unit.
Check the protection fuses arranged
on the underside of the control unit are
functioning
Extend the wire until it reaches 80 cm
Wire too short
and if necessary replace it
Forward speed
Reduce speed
Cooling failure
Reposition the protective guard
Check the fan positioned on the air/
oil exchanger is functioning. Check the
Cooling failure
cleanliness of the cooling fins on the
exchanger, check the filter condition (see
page X)
Advertisement
Table of Contents
