Hi/Lo Temperature Readings; Sensor Search - La Crosse Technology 308-1409BTV2 Manual

• Press the SET/HI/LO button to view the LO records.
• Hold the SET/HI/LO button for 2 seconds to manually clear the
LO records in memory.
• Press the SET/HI/LO button again, to view the HI records.
• Hold the SET/HI/LO button for 2 seconds to manually clear the HI records in memory.
Note: The records will automatically reset at 12:00AM.
LO Temperature Records
The arrows next to the temperature readings indicate if the temperature is rising, falling or remaining
steady.
• Temperature has risen (2°F / 1°C)
• Temperature has not changed
• Temperature has fallen (2°F / 1°C)
• If you are seeing dashes in place of outdoor temperature, first check your sensor batteries.
• Hold the +/°F/°C button for 3 seconds to search for the sensor. Sensor Reception icon will flash while
searching and be solid when sensor signal is received.
• If you regain connection while the sensor is mounted, great. If you do not regain connection, bring the
sensor within 10 feet of the station and search again.
Note:
• If the signal is lost, the RX will display the ast data recorded from sensor for 10 minutes.
• After that 10 minutes if the signal does not come back then you will see dashes "--".
• After 30 minutes, start looking for the sensor signal automatically.
W IRE LE S S T EMP E RAT U R E STATI O N
HI / LO T E M P ER AT U RE REA DI N GS
SE N S O R S EA RC H
HI Temperature Records
Rising
Unchanged
4 | PAGE