Sony PCG-Z505LE Primary User Manual page 99

VAIO® Z505 SuperSlim Pro™ Notebook User Guide
❑
Click the Advanced button on the General tab, and Confirm the following
information:
1 Enable Deep Sleep is selected with a checkmark.
2 The message "Standby function is enabled" is displayed. If the message
reads "Standby function is disabled", click the Enable button.
3 The message "Hibernation feature is enabled" is displayed. If the
message reads "Hibernation feature is disabled", click the Enable
button.
4 Click OK and restart your notebook.
❑
If you are connecting an optical disc drive with a PC card, disconnect it by
stopping the PC card. Use the Sony Notebook Setup utility to disable devices
that you are not currently using. See "To remove a PC card" on page 44 for
more information.
❑
Make sure the PC Card is compatible with your notebook's Windows®
operating system.
✍
Your notebook's operating system may become unstable if a lower power state,
such as system hibernation is initiated and then changed before the notebook
completely enters the lower power state. To restore the notebook to its normal
operating stability:
❑
Close all open applications.
❑
Push and hold the power button for four seconds or longer to shut down
the notebook.
Use the PowerPanel utility to change the Thermal Control Strategy setting to
Quiet. This setting slows down the CPU speed. See PowerPanel Help for more
information.
98