Page 2
Dear Customer, We would like to thank you for choosing this equipment and welcome you to the SVP’s growing family of products. We are sure that the addition of this equipment to your existing installation will cause you nothing but satisfaction.
LNA - Low Noise Amplifier for COFDM Signals IMPORTANT NOTES: 1. The LNA low noise preamplifier for COFDM signals has a selective input filter, which can be modified under request of the customer in order to work in the wanted frequency range. 2.
COFDM reception Low Noise Preamplifier 1 Description The very low noise preamplifier for COFDM signals offers its best performance with COFDM digital links. Also, it can be used with analogue links. This LNA is very useful for Broadcast applications and air links. This equipment expands the possibilities of existing COFDM digital links, because with it, the noise figure of the receivers is improved.
COFDM reception Low Noise Preamplifier 2 Technical Specifications RF Specifications Table 2.1 RF Specifications Item Specification Frequency range 2.0 to 2.7 GHz Noise figure 0,9 dB Typical Gain >25 dB IP3 OUT +33 dBm Typical Input return loss >20 dB (by isolator) Output return loss 10 dB Typical Number of filter poles...
Page 12
End note At SVP Broadcast Microwave S.L. we make a constant effort to continuously improve our equipments and models. For that reason, please understand that there may be some changes in design, equipment and technology. Therefore, we cannot be held liable for the data, figures and descriptions given in this datasheet.
Page 13
SVP Broadcast Microwave reserves the right to make changes to this user’s guide and the device without prior warning. C/Zubiaurre 7 bajo 48215 Iurreta Vizcaya – España Tel-34-94620 3722 info@svpbm.com www.svpbm.com...
Need help?
Do you have a question about the LNA-2GHz and is the answer not in the manual?
Questions and answers