Joovy Toy Room2 1002 Manual page 2

EN FR ES
Please read these instructions carefully before use and keep them for future reference.
• This product is a TOY playard for dolls and stuffed toys ONLY.
• NEVER use this toy for a baby or child for any purpose whatsoever.
• Death or Serious Injury may occur.
• Maximum weight allowed = 5 lbs.
• The product, including side rails, must be fully erected prior to use. Make sure latches are secure.
• Always provide the supervision necessary for the safety of your child.
• This product requires adult assembly. Be sure the playard is set up completely and properly before use.
• ALWAYS check that each of the four top rails are locked and the center of the floor is pushed down before use.
• Do not use any attachments or items not included in this instruction manual with this playard.
• POSSIBLE PINCHING HAZARD. When setting up the playard, use caution to avoid pinching your fingers on the
top corners
• Keep children away from the playard during set-up.
• Discard all packaging materials properly. Do not allow children to play with them.
If you experience any difficulty with the assembly or use of this product, or if you have a question regarding these
UNITED STATES – Joovy: (877) 456-5049, Hours 8:30 am – 5:00 pm Central Time.
1 Assembling and Using your Toy Playard
To ensure safe operation of your toy playard, please follow these instructions carefully.
2 Unpacking the Product from the Box
• Carefully remove toy playard and all parts from the box and plastic bag.
• Remove any cardboard packing materials.
• Identify the parts (toy playard, travel bag, and documents (documents not shown) with the pictures in Figure 2.1.
• Remove all plastic or packing materials from any areas of the product and discard properly. Do not allow children to play with them.
3 Unpacking from the Travel Bag/Assembling the Toy Playard
• Keep children away from playard while unpacking.
• Open the travel bag and remove the toy playard.
• Set the toy playard so it is resting on its feet.
• Pull upward on an upper side rail until it is straight. See Figure 3.1.
• Then rotate the rail inward to lock. See Figure 3.2.
NOTE: There is ONE mechanism that locks each rail on all four sides.
• Repeat on the other three rails.
• Once you have locked the side rails in the up position, go back and check each side rail again to be sure they are all locked into position.
• Push down on the center of the floor. See Figure 3.3.
4 Folding/Packing the Toy Playard
• Pull upward on the webbing loop near the center of the toy playard floor. See Figure 4.1.
• Then unlock one upper rail by rotating the rail outward and then push down. See Figure 4.2.
• Repeat on the other three rails until all four top rails have been unlocked and folded.
• Gather the playard together until it is compact and completely folded. See Figure 4.3.
• Open the travel bag and slide it over the folded playard. Once the playard is completely inside the travel bag pull the draw strings to close.
See Figure 4.4.
ALWAYS ensure that all side rails are locked into position before using this product.
Please do not return this product to the store
instructions, please contact our Customer Service Department:
CANADA – ISSI Inc.: (800) 667-4111, Hours 8:30 am – 5:00 pm Eastern Time.
Please note: Styles and colors may vary.
Adult assembly is required for this product. No Tools Required
Be careful not to pinch your fingers on the top corners during assembly.
NEVER use items not recommended by Joovy with this product.
WARNING
!
WARNING
!
WARNING
!