Page 1
Keep these instructions for future reference. Joovy • 2919 Canton Street • Dallas, TX 75226 • (877) 456-5049 • Fax: (214) 761-1774 E-mail: customerservice@joovy.com • Website: www.joovy.com Toy Caboose Stroller Instruction Manual...
Page 2
• Hanging bags or other toys from the handlebars or any other parts of this toy may change its balance and cause a hazardous unstable condition. • When installing a toy infant carrier onto the stroller, ALWAYS use the restraining strap to secure the carrier in place.
• Remove the cardboard packing materials from the ends of the frame. • Identify the parts (stroller, canopy, tray, front wheels (2), rear wheels (2), rear axle, washers (2), axle locks (2), axle caps (2), hubcaps (2), car seat carrier support and documents with the pictures in Figures 1 and 1A.
Wheels • Turn your stroller upside down so that it is resting on the seatback. • Locate the rear axle and slide it through the holes into the frame near the platform. • Locate a metal washer and slide the washer onto one end of the axle.
Page 5
Attaching/Detaching the Front Tray • To attach the front tray, line up the tray with the tubing on the front of the stroller and push inward until the tray snaps into place. See Figure 8. Pull outward on the tray sides to be sure both are snapped securely in place.
• This product is a TOY stroller for dolls or stuffed toys ONLY. • NEVER use this toy to carry a baby or child for any purpose whatsoever. Death or Serious Injury may occur.
Page 7
Securing a Rear Standing Doll • Push the bench seat to its most forward position. • Position the doll on the platform on the back of the stroller facing forward with both of their hands on the handles. See Figure 13.
• Adjust the seat belt to be snug around the doll’s waist by using the adjustment strap near the buckle. • This product is a TOY stroller for dolls or stuffed toys ONLY. • NEVER use this toy to carry a baby or child for any purpose whatsoever.
Page 9
Using the stroller as a Doll Car Seat Carrier • To use the stroller to carry a doll car seat carrier, you must replace the Front Tray with the Car Seat Carrier Support. • Remove the Front Tray by pressing...
• Secure the stroller in the folded position by engaging the locking latch located on the right side of the stroller over the extended rivet on the right side of the stroller. See Figure 20.
If needed, please contact Joovy at the toll-free phone number listed below. Fabric fading may occur if the stroller is left in direct sunlight for long periods of time. When not in use, store the stroller out of direct sun.
Need help?
Do you have a question about the 42 and is the answer not in the manual?
Questions and answers