Sony PCG-FX290 Primary User Manual page 69

To remove your computer from the port replicator when the power is off
1 Turn off your computer and the connected peripherals.
2 Pull the levers on each side of the port replicator to disengage the computer
from the port replicator.
Disengaging computer from port replicator
3 Lift the computer away from the port replicator.
Port replicator connector cover
4 Close the port replicator connector cover on the bottom of your computer.
It is extremely important to close the port replicator connector cover after removing
your computer from the port replicator. If the cover is left open, dirt may get inside and
damage the computer.
Connecting the Port Replicator
Lever
69