Active Bending Lights - Volvo XC90 Twin Engine 2019 Owner's Manual

LIGHTING
||
NOTE
This automatic flashing sequence can be
•
stopped by moving the stalk switch
immediately in the opposite direction.
If the symbol for direction indicators in
•
the driver display flashes more quickly
than normal - see the message in the
driver display.
Continuous flash sequence
Move the stalk switch up or down to its end
position.
The stalk switch remains in its position and is
moved back manually, or automatically by the
steering wheel movement.
Related information
Hazard warning flashers (p. 158)
•
Adjusting light functions via the centre dis-
•
play (p. 151)
LED (Light Emitting Diode)
5
156

Active bending lights*

Active bending lights are designed to provide
maximum illumination in bends and junctions.
5
Cars with LED headlamps* can have active
bending lights, depending on the car's equip-
ment level.
Headlamp pattern with function deactivated (left) and
activated (right) respectively.
Active bending lights follow steering wheel move-
ments to provide maximum illumination in bends
and junctions and can thereby provide the driver
with improved visibility.
The function is activated automatically when the
car is started. In the event of a fault in the func-
tion, the symbol illuminates in the driver
display at the same time as the driver display
shows an explanatory text.
The function is only active in weak daylight or
darkness and only when the car is moving and
dipped beam is switched on.
Deactivating/activating the function
The function is activated when the car is supplied
from the factory and can be deactivated/acti-
vated via the centre display's function view.
Press the Active Bending
Lights
button.
Related information
Adjusting light functions via the centre dis-
•
play (p. 151)
* Option/accessory.