Garmin BC 30 Troubleshooting

Garmin BC 30 Troubleshooting

Wireless backup camera
Hide thumbs Also See for BC 30:

Advertisement

BC 30 Wireless Backup Camera isn't working properly

If you are encountering difficulty using the BC 30 Wireless Backup Camera the troubleshooting
below should be able to alleviate most concerns:
Compatibility: Ensure your automotive device is compatible with the BC 30
A list of compatible devices can be found in the FAQ:
can add a backup camera
Software Update: Update the automotive device's software using
The BC 30 itself does not require additional software updates; however, the compatible
navigation device used with the backup camera may need to be updated from time to
time.
Installation: The BC 30 requires proper installation and correct accessories in order to function.
Verify you are using the Vehicle Power Cable/Camera Receiver included with the BC 30
o
While this cable may appear very similar to the vehicle cable originally included
with your automotive device, the BC 30 will only work with the cable packaged
with the wireless camera. This cable includes an internal wireless receiver not
available on your original power cable. On the end of the cable that connects to
your vehicle's 12 volt outlet, the bottom of this connection should have a BC 30
label to identify that the correct cable is being used.
Verify that the camera is
o
Garmin recommends having the BC 30 professionally installed. Otherwise, please
follow the installation instructions included with the BC 30.
o
BC 30 Installation Video series
Ensure that the transmitter is not connected directly to metal
Ensure that nothing metal is obstructing the path from the transmitter to the receiver
(vehicle cable)
Use an
extension cable
45 feet from the receiver
Pairing the Camera: The camera transmitter must be paired with the receiver connected to the
device in order to display an image
Detailed Instructions can be found in the FAQ:
Camera transmitter and the BC 30 Receiver
If the device disconnects or shows a blank image after completing pairing, this can
generally be resolved by rebooting the automotive device.
installed
correctly
in cases where the transmitter would be mounted further than 40-
Automotive GPS devices that
Garmin Express
Pairing the BC 30 Wireless Backup

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BC 30 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Garmin BC 30

  • Page 1 On the end of the cable that connects to your vehicle's 12 volt outlet, the bottom of this connection should have a BC 30 label to identify that the correct cable is being used.
  • Page 2 If the BC 30 is installed to display on the navigation device when the vehicle is put into reverse and is not displaying when the engine is running, turn off the engine but leave the ignition on and put the vehicle in reverse. If the BC 30 works, then the vehicle may require a relay.

Table of Contents