Utilities; Laserconfig - idp SMART-70X User Manual

4. Utilities

4.1. LaserConfig

SMART-70X is optimized for the best engraving in the factory. However, the user can
configure the power, speed, position and other values for laser engraving.
Please run the LaserConfig in the '\SMART-70X\Utilities\' folder for adjusting a
configuration of SMART-70X.
The left window is displayed
after connecting a SMART-
70X when running
LaserConfig.
 The power of SMART-
70X should be connected
and turned on before
running LaserConfig.
The SmartID or other

laser utility program
should be closed before
running LaserConfig.
 The 'Connection failed to
SMART-70X' pop-up
window is displayed if
LaserConfig can't
connect the SMART-70X.
20