Advertisement
F
EATURES
________________________________________________________________________________________________________________________
Mecha = Precision built with the highest quality components.
Use for consistent single row 360's (dual axis controllers coming soon).
Other uses include turntable, HDR bracketing, time-lapse video and later use
with Fanotec Carbon Fiber Slide Rails and cables.
The rotators are modular and can be used with different controllers supporting
1 to 4 axis.
Mecha's features justify doing price comparisons against higher end units
costing thousands of dollars.
Out the box Mecha is pre configured with 3 presets and ready to shoot.
Load 1 = executes 4 shots around.
Load 2 = executes 6 shots around.
Load 3 = executes 8 shots around.
The unit is able to operate with or without web browser controller.
Attach camera to Mecha by use of the sync cable.
Turn on, press #1 >(right arrow) , shooting sequence begins to the right begins
with 4 shots around.
Turn on, press #2 < (left arrow) shooting sequence begins to the left begins
with 6 shots around, etc.
Using the controller with Wi-Fi interface to a mobile/PC device browser offers
access to over 50 tools for status displays, customizing shoots, and setting up
presets as needed.
Some features include:
Assign a total number of shots around 2-360.
Rotate left or right.
Tool for testing No Parallax Point (NPP) in live view.
HDR bracketing of shots in a set (1-7, + custom)
Control Auto Focus time in milliseconds.
4
© Nodal Ninja All rights reserved
W
Set a delay for
ake up
B
Set a delay for
efore exposure
E
Set a delay for
xposure
A
Set a delay for
fter exposure
Rewind to initial position (useful to avoid cable wrap with some configurations)
On/off repeat number of sequences + length of delay between sequences.
Create up to 3 custom profiles which can be assigned to the 3 physical
Buttons on controller, no need for an interface to use them.
Cancel operation smoothly.
Emergency stop.
Ability to take extra shots step by step for patching in a panorama.
Support for partial panoramas and repeated as desired.
Can operate both in AP or STA mode, allows the use in the studio or in
the field as multiple stations some of which can be dedicated for use as
a turntable, others for panoramas, and others for rail and video with
upcoming accessories.
Turntable set with the desired speed (RPM) and smooth acceleration.
Visual feedback of the current shoot/position in set with time estimation
until completion.
Firmware update is via WiFi through the Internet.
May be used with a power bank for extended use.
Gesture support for fine-tuning of the initial position or for extra shots.
MECHA E1 C1 v0.2.1
Advertisement
