Operational Menu - Dedal-NV Tracker-T2.380 Operation Manual

In the Tracker-T2.380 model, you can change the screen
brightness by pressing buttons (3) and (4) in observation mode.
In the Tracker-T4.642 model, you can change the screen
brightness or digital zoom (1x / 2x) by pressing buttons (3) and
(4) in observation mode depending on which button was
pressed first.
Brightness adjustment and digital zoom indicators appear
in the top centre of the screen.
Battery discharge indicator is shown in the top of the
screen and measured in percent.
 Due to different discharge curves of different battery brands,
the battery discharge indicator may show less accurate
information.
Tracker-T2.380/Tracker-T4.642. Operation Manual
N O T E !

6.1 Operational Menu

Enter the main menu by pressing button (2) (Fig. 1) for
more than two seconds. The appearance of the main
(operational) menu is shown in Figure 3.
<EXIT
THERMAL VISION MODE
COLOUR SCHEME
RANGEFINDER
SERVICE
QUICK MENU
Figure 3 – Operational Menu
The operational menu is shown in the centre of the screen.
Use buttons (3) and (4) for navigation through the menus.
Press button (2) to confirm the selected option.
Select the line EXIT to leave the operational menu
Select the line BACK to leave the current submenu and
move one level up.
9