Technical Service; Transportation And Storage; Utilization - Dedal-NV Tracker-T2.380 Operation Manual

9 TECHNICAL SERVICE

Technical service
inspection and supplied delivery set completeness check.
The external appearance of the Device must correlate to the
technical documentation. Dents on external surfaces are not
allowed. All fixtures must be tightened. Rotation and
spontaneous unscrewing of parts during operation are not
allowed. All moving components of the Device must be moved
smoothly without backlash and jamming.
It is recommended to periodically clean the external optical
parts with the supplied cloth to protect them from moisture and
dust.

10 TRANSPORTATION AND STORAGE

Store the Device in the supplied protective bag or a hard
case with the protective objective lens cap on. Store the Device
at temperatures from than 10
not exceeding 85%. Remove the batteries from the Device
during extended periods of non-operation to avoid batteries
leakage.
Transportation of the Device in the protective bag or hard
Tracker-T2.380/Tracker-T4.642. Operation Manual
comprises external appearance
C to 35 C with relative humidity
o o
case can be performed by any transport to any distance,
including transportation by air in a hermetically sealed
compartment.
Preserve the Device from impacts, direct sunlight, rain,
snow, and dust.

11 UTILIZATION

The Device does not present a danger to humans or nature.
Only metal alloy parts of the Device are subjects for recycling. If
necessary, request the list of the alloys content from the
manufacturer.
15