Sony Computer Applications Guide Application Manual page 31

Computer applications guide
Table of Contents

Advertisement

DVD. The name of the power switch on the
camcorder varies depending on the model.
3
Insert a recorded cassette into your
camcorder.
4
Connect your camcorder to a
computer via an i.LINK cable
(optional). (p. 15)
Note
b
• When you connect your camcorder to a
computer, make sure you insert the connector in
the correct direction. If you insert the connector
forcibly, it may be damaged, and causes a
malfunction of your camcorder.
5
For touch panel models,
select [BURN DVD] on
of your camcorder.
For SEL/PUSH EXEC dial models,
press BURN DVD/VCD of your
camcorder, then select [DVD] on the
[SELECT DISC].
"Click to DVD" starts up and the on-screen
instructions appear on your computer.
The procedure of the menu setting varies
depending on the model.
6
Place a writable DVD in the disc drive
of the computer.
7
For touch panel models,
select [EXEC] on your camcorder.
For SEL/PUSH EXEC dial models,
press the dial on your camcorder.
BURN DVD
START
CREATE DVD?
EXEC
or
8
0:00:00:00
CANCEL
The status of the operation on your
computer is displayed on the LCD screen of
your camcorder.
CAPTURING: The picture recorded on
the tape is being copied to the computer.
CONVERTING: The picture is being
converted to the MPEG2 format.
WRITING: The picture is being written
onto the DVD.
Note
b
• The screen varies depending on the model.
Tip
z
• If you use a DVD-RW/+RW which has other
data stored on it, the message [This is a
recorded disc. Delete and overwrite?] appears
on the LCD screen of your camcorder. When
you select [EXEC], the existing data is erased
and new data is written.
Follow the steps below to finish
creating a DVD.
For touch panel models
Select [
END] or [NO] of your
camcorder.
For SEL/PUSH EXEC dial models
Press BURN DVD/VCD of your
camcorder.
The disc tray comes out automatically.
BURN DVD
COMPLETED
C r e a t e a n o t h e r
c o p y ?
D i s c t r a y o p e n s .
YES
To create another DVD with the same
content, follow the on-screen instructions,
then repeat steps 7 and 8. The disc tray
comes out and place a new writable DVD in
the disc drive.
Note
b
• The screen varies depending on the model.
0:00:00:00
NO
,continued
31
Other functions

Advertisement

Table of Contents
loading

Table of Contents