Advertisement
Advanced
Operations:
Each time you press a Source Select button on the wireless remote control, the functions of the remote unit change to
operate the specific source you've selected. The following section describes the action that each button performs in each
operating mode. Note: Not all buttons are active in all modes.
Watching Television
Shuts off power to the entire system, regardless of which components happen to be on
1. System Off button.
at the time.
Use these keys to enter TV channels.
2. Numeric Keypad.
Press once to block the audio portion of the program temporarily, as during a telephone
3. Mute button.
conversation. Press again to resume hearing the audio portion of the program.
Enters the numbers you've pressed on the numeric keypad.
4. Enter button.
5. Jump button. Returns to the previous TV channel.
Cycles through television input modes, advancing to the next input each time you press the
6. TV/Video button.
button. For example: TV -> Video 1 -> Video 2 -> Video 3 -> Video 4 -> Video 5 -> TV.
Exits the TV menu.
7. Exit button.
8. Volume +/- buttons.
9. Ch/Track +/- buttons.
10. Up/Down/Left/Right/OK cursor buttons.
current menu selection.
Activates TV channel display.
11. Display button.
Activates the TV on-screen menu.
12. Menu button.
Turns off the television. Useful when switching from video entertainment to audio only.
13. TV off button.
Cycles through TV widescreen viewing modes.
14. TV wide button.
15. TV Source Select button.
required), and the A/V receiver. Automatically selects the correct inputs on all components. Changes the
remote control mode to operate the television.
NOTE: If you have a cable TV, satellite TV or High Definition TV set-top box*, your installer may have programmed
one of the buttons for your favorites. Please recommend a button you will always remember (e.g., Disc).
Watching an Optional, Compatible Cable, Satellite or High Definition TV Set-Top Box*
Shuts off power to the entire system, regardless of which components happen to be on at
1. System Off button.
the time.
Use these keys to enter cable channels.
2. Numeric Keypad.
Press once to block the audio portion of the program temporarily, as during a telephone
3. Mute button.
conversation. Press again to resume hearing the audio portion of the program.
8
Main Room
Adjusts the A/V receiver volume.
Changes the television channel up and down.
Navigate the TV menu. The central "-|-" or "OK" button accepts the
Automatically turns on the TV, the cable, satellite or High Definition TV receiver (if
Advertisement
