Paging: How To Use The Pcm; Paging Zones; How To; How To Make An All-Call Page - Avaya LUPCMALL Installation And Use Manual

13.

Paging: How To Use The PCM

13.1. Paging Zones

The PCM system supports from 3 to 99 different paging zones (in groups of 3). It also supports up to 32 paging zone groups
for voice paging applications, and 11 zone groups for signaling applications (night ring, code call, EM/SC, 8 time triggers).
Each zone group consists of 1 to 99 (user-programmed) zones. Paging zone groups are accessible by dialing a specific zone
group number through the telephone. Signaling zone groups are automatically activated by the system.
Each individual paging zone can be either of two types, one-way paging or two-way talk back (talk back requires PCMTBM
module and is operable only in 70V central-amplified zones). Talk back is not available to zone groups.
Refer to System Programming, Section 11, for instructions on how to program zones and zone groups.
13.2. How To Page Zones
1. Dial the paging access number for your telephone system.
2. Listen for the confirmation tone if enabled (a double beep).
3. Dial the number of the zone you wish to page. All dialing must be two (2) digits, i.e., [0] [1] for zone 1, [0] [2] for zone
2, etc., through [0] [9] for zone 9, then up to [9] [9] for zone 99. If a zone number does not exist, the caller will hear a
busy tone.
4. Make the page and hang up when finished.

13.3. How To Make An All-Call Page

1. Dial the paging access number for your telephone system.
2. Listen for the confirmation tone if enabled (double beep).
3. Dial [0] [0], make the All-Call page, and hang up when finished.
Note: See System Programming, Section 11, to disable All-Call.

13.4. How To Page A Zone Group

1. Dial the paging access number for your telephone system.
2. Listen for the confirmation tone if enabled (a double beep).
3. Dial [*] and the zone group number you wish to page. Zone group numbers consist of 2 digits.
Example: Dial: [*] [0] [1] for zone group 1, [*] [0] [2] for zone group 2, etc., through [*] [0] [9] for zone group 9, then up to
[*] [3] [2] for zone group 32 (maximum number of zone groups). Dialing numbers above 32 or dialing a zone group that does
not exist will result in a busy signal.
NOTE: Talk Back is not available in zone group paging.
[45]