Setting Up; Charging The Battery; Orderman Leo2 Settings - Orderman Leo2 Operating Instructions Manual

Leo2 and Leo2plus
4

Setting Up

4.1 Charging the Battery

Insert the battery in the handheld device and connect the power supply unit to
the bottom connector of the Orderman Leo2 and to the mains. The battery will
now be charging.
When the handheld device is switched on, the flashing charging
symbol indicates the battery charging. A complete charging
procedure requires approx. 4 hours. The handheld device can be
used during the charging procedure.
A fully charged battery can be used for up to 18 hours (depending on the
setting of the automatic shutdown time and the background lighting – see page
16).
The number of charging cycles for the Orderman Leo2 battery is approx. 1000.
This subjects the battery to natural wear, as a result of this the operating time
may be shortened.
Before using for the first time, charge the battery for at least 4 hours
in the handheld device. To charge quickly you can also use the
Orderman Leo2 charging station (option). To do so, follow the
Tip
instructions in the operating manual for the Orderman Leo2 charging
station.

4.2 Orderman Leo2 Settings

In order to access the Orderman Setup, when the device is switched off keep
the enter key pressed and press the On/Off key. Release the Enter button and
the Orderman Setup opens.
- 15 -
Operating Instructions