Specifications - Sony HT-1750DP Operating Instructions Manual

Specifications

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
40 – 20,000 Hz; rated 90 watts per channel
minimum RMS power, with no more than
0.7 % total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
POWER OUTPUT
Rated Power Output at Stereo Mode
(8 ohms 40 Hz – 20 kHz, THD 0.7 %)
STR-K750P:
Reference Power Output
(8 ohms 1 kHz, THD 0.7 %)
STR-K750P:
1) Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
CD, MD/TAPE, DVD,
VIDEO 1, 2
Inputs (Analog)
CD, MD/TAPE, DVD,
VIDEO 1, 2
2) INPUT SHORT (with sound field and tone
bypassed).
3) Weighted network, input level.
US
44
90 W + 90 W
1)
FRONT :100 W/ch
CENTER 1) : 100 W
1)
SURR : 100 W/ch
10 Hz – 50 kHz
+0.5/–2 dB (with sound
field and tone bypassed)
Sensitivity: 500 mV
Impedance: 50 kilohms
2)
S/N : 96 dB
3)
(A, 500 mV )
Inputs (Digital)
DVD (Coaxial)
VIDEO 2 (Optical)
Outputs
MD/TAPE (OUT),
VIDEO 1
(AUDIO OUT)
SUB WOOFER
Tone
Gain levels:
FM tuner section
Tuning range
Antenna terminals
Intermediate Frequency
Sensitivity
Mono:
Stereo:
Usable sensitivity
S/N
Mono:
Stereo:
Harmonic distortion at 1 kHz
Mono:
Stereo:
Separation
Frequency response
Selectivity
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Sensitivity: –
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
Voltage: 500 mV
Impedance: 10 kilohms
Voltage: 2 V
Impedance: 1 kilohms
±6 dB, 1 dB step
87.5 - 108.0 MHz
75 ohms, unbalanced
10.7 MHz
18.3 dBf, 2.2 µV/75 ohms
38.3 dBf, 22.5 µV/75 ohms
11.2 dBf, 1 µV/75 ohms
76 dB
70 dB
0.3%
0.5%
45 dB at 1 kHz
30 Hz – 15 kHz,
+0.5/–2 dB
60 dB at 400 kHz