About Indicators; Falling Asleep To Music; Sleep Timer - Sony DHC-FL5D Operating Instructions Manual

Tips
• If acoustic feedback (howling) occurs, move the
microphone away from the speakers or change the
direction of the microphone.
• If you want to record your voice through the
microphone only, you can do so by selecting the
DVD function and not playing a disc.
• When high level sound signals are input, the unit
automatically adjusts the recording level to prevent
distortion of the recorded sound signal (Auto Level
Control Function).

About indicators

MULTI CHANNEL DECODING indicator:
Lights up except when the 2 channel source is
being played back in DVD or DIGITAL
function.
PRO LOGIC indicator (in the display):
Lights up when the unit applies Dolby Pro
Logic processing to 2 channel signals in order
to output the center and rear channel signals.
; DIGITAL indicator (in the display):
Lights up when the unit is decoding signals
recorded in the Dolby Digital format.
dts indicator (in the display): Light up when
DTS signals are input.

Falling asleep to music

— Sleep Timer

You can set the system to turn off at a preset
time, so you can fall asleep to music.
Press SLEEP on the remote.
Each time you press the button, the minute
display (the turn-off time) changes as follows:
AUTO* t 90 t 80 t 70 t ... t
10 t OFF
* The power turns off when the current disc or tape
finishes playback (for up to 100 minutes).
To
Press
Check the remaining SLEEP on the remote once.
time**
Change the time to
SLEEP on the remote
turn off repeatedly to select the time
you want.
Cancel the Sleep
SLEEP on the remote
Timer repeatedly until "SLEEP
OFF" appears.
** You cannot check the remaining time if you select
"AUTO".
GB
55