Sony DHC-FL5D Operating Instructions Manual page 12

Hooking up the system (continued)
5 Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adaptor).
6 (Except for Pan American and
European models)
Set the color system according to your
TV.
The color system is factory set to NTSC for
region code 3 models, and PAL for other
region code models. Each time you perform
the procedure below, the color system
changes as follows:
NTSC y PAL
Use the buttons on the unit.
1
Press ?/1 to turn off the system.
2
Press ?/1 while holding down X.
The system turns on and the color system is
changed.
Before connecting the Center and
Rear speakers
Stick the supplied speaker pads to the bottom
of the center speaker and rear speakers to
stabilize the speakers and prevent them from
slipping.
Center speaker
GB
12
Rear speaker
After hooking up the system, we recommend to
place the system as follows:
Sub woofer
Front speaker
(Left)
Front speaker
(Left)
Optional stand (not supplied)*
Sub woofer
* The optional stands are supplied for U.S.A. model.
When placing the speakers on top of the sub
woofer and the main unit, be sure to place the
foot of the speakers to fit in the hollows on top
of the sub woofer and the main unit.
Main unit
Front speaker
(Right)
Front speaker
(Right)
Main unit