Sony DAV-LF1 Operating Instructions Manual page 91

Be sure to change the value in the Setup Display
when you move the speakers.
FRONT Front speaker distance from the
1.6 m*
listening position can be set in 0.2
meter increments from 1.0 to 7.0
meters.
CENTER Center speaker distance can be moved
1.6 m*
up to 1.6 meters closer to the listening
(appears when
position from the front speaker
you set
distance, in 0.2 meter increments.
[CENTER] to
[YES] in the
[SIZE] setting.)
SURROUND
Surround speaker distance can be
1.6 m*
moved up to 4.6 meters closer to the
(appears except
listening position from the front
when you set
speaker distance, in 0.2 meter
[SURROUND]
increments.
to [NONE] in
the [SIZE]
setting.)
* When you perform the Quick Setup (page 35), the
default settings are changed.
Notes
• When you set the distance, the sound cuts off for a
moment.
• If all front and surround speakers are not placed at an
equal distance from your listening position, set the
distance according to the closest speaker.
• Do not place the surround speakers farther away from
your listening position than the front speakers.
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
x LEVEL
You can vary the level of each speaker as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
CENTER Adjusts the level of the center
0 dB*
speaker (–6 dB to +6 dB, 1 dB
(appears when
increments).
you set
[CENTER] to
[YES] in the
[SIZE] setting.)
SURROUND Adjusts the level of the surround
LEFT 0 dB*
speakers (–6 dB to +6 dB, 1 dB
SURROUND
increments).
RIGHT 0 dB*
(appears except
when you set
[SURROUND] to
[NONE] in the
[SIZE] setting.)
SUBWOOFER Adjusts the level of the subwoofer
+4 dB*
(–6 dB to +6 dB, 1 dB increments).
* When you perform the Quick Setup (page 35), the
default settings are changed.
x BALANCE
You can vary the balance of the left and right
speakers as follows. Be sure to set [TEST
TONE] to [ON] for easy adjustment.
FRONT Adjusts the balance between the front
(CENTER)
left and right speakers.
The center position is shown as
"---." (You can adjust from the center 6
steps to left or right.)
To adjust the volume of all the
speakers at one time
Use the VOL control on the control unit, or press
VOL +/–.
x TEST TONE
The speakers will emit a test tone to adjust
[LEVEL] and [BALANCE].
OFF The test tone is not emitted from the
speakers.
ON
The test tone is emitted from both left and
right speakers simultaneously while
adjusting balance. When you select one of
the [SPEAKER SETUP] items, the test
tone is emitted from each speaker in
sequence.
continued
91 GB