Warning - Sony DAV-S550 Operating Instructions Manual

WARNING

To prevent fire or shock
hazard, do not expose the unit
to rain or moisture.
Do not install the appliance in a
confined space, such as a bookcase
or built-in cabinet.
To prevent fire, do not cover the
ventilation of the apparatus with
news papers, table-cloths, curtains,
etc. And don't place lighted candles
on the apparatus.
To prevent fire or shock hazard, do
not place objects filled with liquids,
such as vases, on the apparatus.
This appliance is classified as a
CLASS 1 LASER product. The label
is located on the bottom exterior.
GB
2
Precautions
Safety
• If anything falls into the cabinet,
• The unit is not disconnected from
• Unplug the unit from the wall
Installing
• Do not install the appliance in a
• Allow adequate air circulation to
• Do not place the unit on surfaces
Don't throw
away the battery
with general
• Do not install the unit near heat
house waste,
dipose of it
correctly as
chemical waste.
• Do not install the unit in an
• Keep the unit and discs away from
• Do not place heavy objects on the
• If the unit is brought directly from
unplug the unit and have it
checked by qualified personnel
before operating it any further.
the mains as long as it is
connected to the mains outlet,
even if the unit itself has been
turned off.
outlet if you do not intend to use it
for an extended period of time. To
disconnect the cord, pull it out by
the plug, never by the cord.
confined space, such as a bookcase
or built-in cabinet.
prevent internal heat buildup.
(rugs, blankets, etc.) or near
materials (curtains, draperies) that
may block the ventilation slots.
sources such as radiators, or air
ducts, or in a place subject to
direct sunlight, excessive dust,
mechanical vibration, or shock.
inclined position. It is designed to
be operated in a horizontal
position only.
equipment with strong magnets,
such as microwave ovens, or large
loudspeakers.
unit.
a cold to a warm location,
moisture may condense inside the
Compact AV System and cause
damage to the lenses. When you
first install the unit, or when you
move it from a cold to a warm
location, wait for about 30 minutes
before operating the unit.