Step 3: Performing The Quick Setup - Sony DAV-HDZ235 Operating Instructions Manual

Step 3: Performing the
Quick Setup
Follow the steps below to make the minimum
number of basic adjustments for using the
system.
C/X/x/c,
1
Turn on the TV.
2
Press [/1.
Note
• Disconnect the headphones when you perform
the Quick Setup. You cannot operate steps after
11 with the headphones connected.
• Make sure that the function is set to "DVD"
(page 26).
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [ ] to run QUICK SETUP.]
ENTER
appears at the bottom of the TV screen. If
this message does not appear, recall the
Quick Setup display (page 17) and perform
again.
4
Press without inserting a disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
5
Press X/x to select a language.
"/1
The system displays the menu and subtitles
in the selected language.
6
Press
The Setup Display for selecting the aspect
ratio of the TV to be connected appears.
DISPLAY
7
Press X/x to select the setting that
matches your TV type.
x If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
[16:9] (page 68)
x If you have a 4:3 standard TV
[4:3 LETTER BOX] or [4:3 PAN SCAN]
(page 68)
8
Press
The Setup Display for selecting the speaker
formation appears.
9
Press C/c to select the speaker
formation image as the speakers are
actually positioned.
For details, see "Getting Optimal Surround
Sound for a Room" (page 62).
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
PORTUGUESE
.
SCREEN SETUP
TV TYPE:
YC C /RGB (HDMI):
B R
4:3 LETTER BOX
SCREEN SAVER:
4:3 PAN SCAN
BACKGROUND:
BLACK LEVEL:
BLACK LEVEL
(COMPONENT OUT)
4:3 OUTPUT:
.
SPEAKER FORMATION
STANDARD
ENGLISH
ENGLISH
FRENCH
SPANISH
16:9
16:9
ON
:
OFF
FULL
continued
15
US