Advertisement
Customizing the Snap! Server
Use the Snap! Assist program to customize your Snap! Server for your specific environment. Run
Snap! Assist on a Windows (95, 98, or NT 4.0 or later) computer. Your computer must be
connected to your network using TCP/IP.
1.
Load the Snap! Server CD-ROM into your computer s CD-ROM drive.
On most computers Snap! Assist starts automatically when you load the CD-ROM. If it doesn t
start, view the contents of the CD-ROM drive. Double-click the SnapAssist program icon.
2.
Snap! Assist displays a list of the Snap! Servers on your
network. Select the server you are installing. (It might take a few
minutes for the server to appear on the list.)
3.
Click the Initial Setup button.
4.
Follow the on-screen instructions to customize your Snap!
Server.
If you need more information about any setting, click Help.
5.
Click Finish to restart the Snap! Server and apply your changes.
Use a Web browser to enable security on your Snap! Server and to perform other management
functions.
1.
Start your Web browser, enter the Snap! Server s IP address in the Location or Address box,
and press Return to display the Home page.
If you don t know the Snap! Server s IP address, use Snap! Assist to look it up, or, if necessary,
assign one.
2.
On the Home page, click Administration to display the Administration page.
3.
When asked to log in, enter Administrator as the user name and enter the Administrator
password (leave the password blank if you have not changed it from its default).
4.
On the Administration page, click the icon corresponding to the task you want to perform.
Page 4
Snap! Server 4000 Quick Start Guide
2
3
Advertisement
