End Gate (optional)
Shredder Hood
The shredder hood on the rear of the spreader helps
prevent manure from flowing over the beaters as well as a
shield for spray off. This helps with "clean" spreading and
to help control the manure from hitting the operator.
The optional end gate is used to prevent manure
from spilling out during filling or transportation as
well as to further deflect material from the
operator during spreading. The end gate should
never be down when the spreader is in use. Have
this down during use may cause damage to the
end gate hood or to the spreader.
For end gate installation instructions, see page 22
© Copyright 2017 ABI Attachments, Inc.
17