Table of Contents
Advertisement
2 Connecting the TV
Required cords
A
Video cord
.
B
Audio cord (not supplied)
Tip
• When you want to output the TV sound or stereo sound of a 2 channel source from the 6 speakers, select the "Dolby
Pro Logic," "Dolby Pro Logic II MOVIE," or "Dolby Pro Logic II MUSIC" sound field (page 34).
3 Connecting the Antenna (Aerial)
To connect the AM loop antenna (aerial)
The shape and the length of the antenna (aerial) is designed to receive AM signals. Do not dismantle
or roll up the antenna (aerial).
1
Remove only the loop part from the plastic stand.
2
Set up the AM loop antenna (aerial).
3
Connect the cords to the AM antenna (aerial) terminals.
Cord (A) or cord (B) can be connected to either terminal.
Note
• Do not place the AM loop antenna (aerial) near the unit or other AV equipment, as noise may result.
Tip
• Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound.
4
Make sure the AM loop antenna (aerial) is connected firmly by pulling softly.
16
GB
Insert the cord pushing
down the terminal clamp.
A
B
Insert until this
part.
Yellow
White (L/audio)
Red (R/audio)
Advertisement
Table of Contents
