Sony DAV-DZ531W Operating Instructions Manual page 18

5 Connecting the IR receiver
Receives the sound by the infrared signals. Connect it to the DIR-R1 jack of the surround amplifier.
Surround amplifier
DIR-R1
SPEAKER
SURROUND L
SURROUND R
When using the IR receiver stand, attach the stand so that both delta marks on the IR receiver and stand
are aligned.
6 Attaching the cover to the surround amplifier
After connecting, you can attach the cover to the surround amplifier for organizing and storing excess
speaker cords.
1
Attach the speaker cord cover by sliding it down along the grooves at the edges of the
surround amplifier.
Surround amplifier
Push the speaker cord cover down until you hear a click. Turn the surround amplifier upside down,
then store the cords in the speaker cord cover.
18
GB
Light blue
IR receiver
Delta marks
IR receiver stand
Speaker cord cover
Grooves
IR receiver